Discussion:
[Freetel-codec2] SM1000 on 2400 bps
Yaremkiv Bogdan
2017-02-12 21:53:49 UTC
Permalink
Hello,

I am playing with SM1000 and codec2. I have sucesfully run codec2 with
1600 bps. I failed with 2400 bps.
What I have to change except (FREEDV_MODE_1600 -> FREEDV_MODE_2400A) ?

Best regards,
-Bohdan Yaremkiv
Hello,
I am playing with SM1000 and codec2. I have sucesfully run codec2 with
1600 bps. I failed with 2400 bps.
What I have to change except (FREEDV_MODE_1600 -> FREEDV_MODE_2400A) ?
Best regards,
-Bohdan Yaremkiv
David Rowe
2017-02-12 22:48:35 UTC
Permalink
Hello Bohdan,

At this stage we haven't ported either of the VHF/UHF FREEDV_2400 modes
to the SM1000.

FREEDV_2400A requires a SDR for tx/rx being a 5kHz wide waveform.
FREEDV2400B would operate through the mic/speaker port of a typical FM
radio.

Cheers,

David
Post by Yaremkiv Bogdan
Hello,
I am playing with SM1000 and codec2. I have sucesfully run codec2 with
1600 bps. I failed with 2400 bps.
What I have to change except (FREEDV_MODE_1600 -> FREEDV_MODE_2400A) ?
Best regards,
-Bohdan Yaremkiv
Hello,
I am playing with SM1000 and codec2. I have sucesfully run codec2
with 1600 bps. I failed with 2400 bps.
What I have to change except (FREEDV_MODE_1600 -> FREEDV_MODE_2400A) ?
Best regards,
-Bohdan Yaremkiv
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Freetel-codec2 mailing list
https://lists.sourceforge.net/lists/listinfo/freetel-codec2
Yaremkiv Bogdan
2017-02-13 18:51:07 UTC
Permalink
Thanks for reply.

Are somebody working on porting 2400B to SM1000 or it is planned for this
year?

Best regards,
-Bohdan
Post by David Rowe
Hello Bohdan,
At this stage we haven't ported either of the VHF/UHF FREEDV_2400 modes
to the SM1000.
FREEDV_2400A requires a SDR for tx/rx being a 5kHz wide waveform.
FREEDV2400B would operate through the mic/speaker port of a typical FM
radio.
Cheers,
David
Post by Yaremkiv Bogdan
Hello,
I am playing with SM1000 and codec2. I have sucesfully run codec2 with
1600 bps. I failed with 2400 bps.
What I have to change except (FREEDV_MODE_1600 -> FREEDV_MODE_2400A) ?
Best regards,
-Bohdan Yaremkiv
Hello,
I am playing with SM1000 and codec2. I have sucesfully run codec2
with 1600 bps. I failed with 2400 bps.
What I have to change except (FREEDV_MODE_1600 -> FREEDV_MODE_2400A)
?
Post by Yaremkiv Bogdan
Best regards,
-Bohdan Yaremkiv
------------------------------------------------------------
------------------
Post by Yaremkiv Bogdan
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Freetel-codec2 mailing list
https://lists.sourceforge.net/lists/listinfo/freetel-codec2
------------------------------------------------------------
------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Freetel-codec2 mailing list
https://lists.sourceforge.net/lists/listinfo/freetel-codec2
Matthew Cook
2017-02-14 06:08:04 UTC
Permalink
Bohdan you'll find David is currently working on a new 700 bps codec and
modem, with a focus to beat SSB performance with Digital Voice.

I'm sure that he'd welcome any assistance porting the 2400B mode to the
SM1000 platform.

73

Matthew
VK5ZM
Post by Yaremkiv Bogdan
Thanks for reply.
Are somebody working on porting 2400B to SM1000 or it is planned for this
year?
Best regards,
-Bohdan
Post by David Rowe
Hello Bohdan,
At this stage we haven't ported either of the VHF/UHF FREEDV_2400 modes
to the SM1000.
FREEDV_2400A requires a SDR for tx/rx being a 5kHz wide waveform.
FREEDV2400B would operate through the mic/speaker port of a typical FM
radio.
Cheers,
David
Post by Yaremkiv Bogdan
Hello,
I am playing with SM1000 and codec2. I have sucesfully run codec2 with
1600 bps. I failed with 2400 bps.
What I have to change except (FREEDV_MODE_1600 -> FREEDV_MODE_2400A) ?
Best regards,
-Bohdan Yaremkiv
Hello,
I am playing with SM1000 and codec2. I have sucesfully run codec2
with 1600 bps. I failed with 2400 bps.
What I have to change except (FREEDV_MODE_1600 ->
FREEDV_MODE_2400A) ?
Post by Yaremkiv Bogdan
Best regards,
-Bohdan Yaremkiv
------------------------------------------------------------
------------------
Post by Yaremkiv Bogdan
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Freetel-codec2 mailing list
https://lists.sourceforge.net/lists/listinfo/freetel-codec2
------------------------------------------------------------
------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Freetel-codec2 mailing list
https://lists.sourceforge.net/lists/listinfo/freetel-codec2
------------------------------------------------------------
------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Freetel-codec2 mailing list
https://lists.sourceforge.net/lists/listinfo/freetel-codec2
Loading...